Go back to the main menu and select Tools again. If Port is greyed out, that's OK, if not and anyĬOM (serial) ports are listed, make a note of which they are. Make sure you restart the Arduino IDE after installing the drivers. On the correct one for your machine and allow it to install the drivers in the normal way. ( CP210xVCPInstaller_x86.exe) and one for 64-bit ( CP210xVCPInstaller_圆4.exe). This will download a zip file CP210x_Universal_Windows_Driver.zip to your usual location.Įxtract the contents to a convenient place and you will find two installers, one for 32-bit computers Click Downloads, then CP210x Universal Windows Driver. Windows 10 OSĭo not follow the instructions for installing the drivers on the Arduino website, instead download the drivers from ![]() If your computer’s operating system is Windows or MacOS, you need to install the SI Labs drivers for the CP2102 If your computer’s operating system is Linux, no drivers are needed. ![]() The only practical difference is the USB connector – a USB-A on the Nanode programmer and a USB-Mini connector on the A "Wicked Device Nanode" and an OpenEnergyMonitor programmer.
0 Comments
Leave a Reply. |